Item NO: TY993
Materials: the surface of this rubber tile is black fine crumb
rubber, and the bottom is black big crumb rubber
Packing: by pallet
Volume for a 20' container: 5868pcs/20ft container ( 500 x 500mm )
1467pcs/20ft container ( 1m x 1m )
This rubber tile is well used in fitness and gym clubs. And the
grey crumb rubber can cover the gust, will make the mat look very
clean. Now we are exporting this to Australia, Tailand and other
countries. To have a beautiful and easy environment,we believe it
is the best choice.
INSTALLATION OF RUBBER TILES:
A. Dry-lay the entire floor tile area. Check the tiles for possible
imperfections or defects
including trim, thickness and colour. Replace any defective
material prior to adhesion.
B. Define the center point of endwalls and connect them by striking
a chalk line down the
middle of the room. On this line, strike a chalk line connecting
the sidewalls which will divide
the room into quarters.
C. A line indicating the space for fitting bordertiles should be
made. Measure the distance to
each wall to provide a half tile or larger border for the
completion of the installation. Adjust
the center line to accommodate this requirement.
D. Line up the first row of tiles with a string line or a straight
edge. Lay a second row either
Ashlar (Brick pattern) or point to point aligning the studs,
squares or ribsvery carefully. Tiles
may be butted corner, whether point to point or ashlar. It is
important not to pressure fit the joints.